****NEW RELEASE**** OMNI-DIRECTIONAL MICROPHONE
For use with many different standard 3.5mm stereo jack applications. These are one of the best microphones on the market today for your video system recording device. We have tested over 30 microphones and have found these to be the best, In fact they pickup so much that you may have to install a piece of small foam over the mic head to melow down the wind sound.
Extreme weather tolerant!
The Omni-Directional means that it covers a 360 degree area, these mics are very durable and offer substantial amount of lead wire to mount it outside of your case (concealed on the bottom is best).
The same microphone is installed on our systems, and you can hear the power of the mic by clicking on one of our videos.
You have 2 options for mounting the mic to your case,
Option 1: It comes with a clip on the mic head and a self stick holder that you can stick to your case and clip the mic head onto it.
Option 2: Snap the clip off of the mic head and drill a 1/2" hole to slide the mic wire through the lip on the bottom of the case, the head of the mic is perferated so it has a stopping point (it will not pull through all the way). Just put a dab of glue around the head as you slide it through so it stays in place, And on the very bottom of the case you will need to drill a 3/8" hole for the plug wire to go inside the case. You can use a rubber grommet or hot glue to fill in your hole around the wire.
Orig. $4.99
NEW LOW Price: $3.50
IN STOCK!
Large quanities are available
